china manufacturer manufacturer factory ASME B16.5 Slip on/So Forged Flange DN500 ASTM A105 A182 F304L Forging So Flange manufacturers

Product Description

ASME B16.5 Slip on/So Forged Flange DN500 ASTM A105 A182 F304L Forging SO Flange

Solution Description

Slip-on flanges are set up on pipes by slipping on the flange bore over the outdoors diameter of pipe and securing it to the pipe by fillet welds. There is no full penetration weld between the pipe and slip-on flanges, therefore the joint are not able to be subject matter to radiography. A slip-on flange can have a single stuffed weld or double fillet weld. As per para 328.5.2 of ASME B31.3, if slip-on flanges are solitary welded the weld is required to be produced at the hub. Exactly where two welds are needed, one fillet weld is manufactured at the hub of the slip-on flange and the CZPT fillet weld is manufactured at the inside of diameter of the flange close to the flange confront. The position of pipe within the slip-on flange need to be such that the fillet weld can be carried out with out damaging the flange face.The measurement of fillet weld on the within of flange is equivalent to the lesser of pipe wall thickness or 6mm.
ASME B31.3 provides three possibilities of weld details for double-welded slip-on flanges. A slip-on flange shall be double-welded as revealed in Fig. 328.5.2B of ASME B31.3 when the support is

  • matter to serious erosion, crevice corrosion, or cyclic loading
  • flammable, harmful, or harming to human tissue
  • beneath severe cyclic situations
  • at temperatures underneath −101°C (−150°F)

The use of slip-on flanges need to be prevented the place several large temperature cycles are predicted, notably if the flanges are not insulated.

Advantages of slip-on flanges
Slip-on flange is a chosen flange for numerous purposes thanks to the pursuing:

  • lower procurement price
  • less talent required for putting in owing to use of fillet welds instead of full penetration butt weld
  • weld end preparing not essential on pipe ends
  • diminished accuracy in the cut size of pipe

Limits and negatives of slip-on flanges

Though the original procurement cost of slip-on flange is minimal, slip-on flange has the subsequent drawbacks:

  • flange set up requires the use of two fillet welds
  • non-harmful evaluation is essential on two welds which helps make the installation value around the very same as weld neck flange
  • slip-on flanges are unsuitable for cyclic loading as mentioned over
  • slip-on flanges are not CZPT in dimensions 2½ inches and in excess of in course 1500 score and not CZPT in any size for class 2500 rating
  • the toughness of a slip-on flange is significantly less than that of a weld neck flange due its design and style (significantly less reinforcement in the hub) and installation approach (fillet weld as an alternative of butt-weld)
Steel Flanges
Material Carbon steel ASTM A105. ASTM A350 LF1. LF2, CL1/CL2, A234, S235JRG2, P245GH
P250GH, P280GHM 16MN, 20MN ,20#
Stainless steel ASTM A182, F304/304L, F316/316L
Alloy metal ASTM A182 A182 F12,F11,F22,F5,F9,F91etc.
Standard ANSI Class one hundred fifty Flanges-Class 2500 Flanges
DIN 6Bar 10Bar 16Bar 25Bar 40Bar
JIS 5K Flanges-20K Flanges
UNI 6Bar 10Bar 16Bar 25Bar 40Bar
EN 6Bar 10Bar 16Bar 25Bar 40Bar
TYPE 1.Welding neck Flange 2.Slip on
3.Blind flange 4.Long welding neck flange
5.Lap joint flange 6.Socket welding
7.Threaded flange 8.Flat flange
Surface area Anti-rust oil, very clear lacquer, Black lacquer, Yellow lacquer,very hot-dipped Galvanized,electrical galvanized
Link Welding, Threaded
Technological Forged, CZPT
Size DN10-DN3600
Package deal 1.>Standard export packaging (Plywood Circumstance Of Outside,Plastic Cloth Of Within). 2:As CZPT ers’ Specifications
Warmth Therapy Normalizing, Annealing, Quenching Tempering
Certification TUV,ISO9001:2008PED97/23/EC,ISO14001:2004,OHSAS18001:2007
Applications Water operates, Shipbuilding market, CZPT & Gas business, CZPT sector, Valve industry,and general pipes connecting initiatives and so on.

 

Comprehensive Photos

Steel Flanges
Flange Variety:Weld Neck Flange,  Socket Weld Flange,  Slip On Flange,  Blind Flange,  Thread Flange, 
Lap CZPT Flange,  Plate Flange,  Orifice Flange,  Spectacle Flange,  Determine 8 Flange, 
Paddle Blank,  Paddle CZPT r,  CZPT Flange,  Single Blind,  Ring CZPT r,
Minimizing Socket Weld flange, Minimizing Weld Neck flange, CZPT Weld Neck Flange,
SAE Flanges, CZPT ulic Flanges,
Personalized Flanges with drawing. 

Material Carbon steelA105, A105N, ST37.2, twenty#, 35#, C40, Q235,
A350 LF2 CL1/CL2, A350 LF3 CL1/CL2, 
A694 F42, F46, F50, F60, F65, F70, 
A516 Gr.sixty, Gr.sixty five, Gr.70
 Alloy steelA182 F11, A182 F22
 Austenitic stainless steelA182 F304/304L, F316L, A182 F316H,
F310,  F321, F321H, F347, F347H
 Duplex stainless steelA182 F51
 Super Duplex stainless steelA182 F53, A182 F55, A182 F60
 Nickel alloyNickel 200, Nickel 201
 Titanium alloyTitan Gr.1, Titan Gr.two
 HastelloyHastelloy C-276, Hastelloy C-22, Hastelloy C-four
 InconelInconel 600, Inconel 625, Inconel 800, Inconel 800H
 MonelMonel 400, Monel K500
 
DimensionDN15 –   DN3000
 PressureClass one hundred fifty#  – 2500#,  PN 2.5- PN40, JIS 5K – 20K, 3000PSI, 6000PSI
 Connection WayFlat Confront (FF),  CZPT d Experience (RF), Ring CZPT (RTJ), MFM, TG
 CommonASME, ANSI, DIN, EN, BS, JIS, GB, AWWA, API, SAE, GOST, MSS
 Technical Forged
 DealPlywood Circumstance/ CZPT Circumstance/ CZPT ized Package deal
 ModelST
 CertificatesAPI, ISO, PED, EC, EU

 

Packaging & CZPT

PIPE CZPT TINGS Flange
Production Name Carbon Steel Flange ASTM ANSI JIS DIN SCH RF WN SO a hundred and fifty LB
Size Range From ½” up to 48 ” 
Plan SCH STD, XS, XXS, SCH 10 ~ SCH 160
CARBON STEEL ASTM A234 WPB, WPC ASTM A420 WPL9, WPL3, WPL6, WPHY-42
STHangZhouRDS ANSI, ISO, JIS, DIN, BS,GB, SH, HG,QOST,Etc.
CE and certification: ISO9001:2000 , API , BV , SGS, LOIYD
Applications range:  Petroleum, chemical, power, gas, metallurgy, shipbuilding.design,water and nuclear power etc. 
Packaging:  seaworthy package,Plywood Cases or pallet or as per customers requirement
The third party inspection: BV,SGS,LOIYD,TUV,and other party alloyed by clients.
Delivery Time: At the earliest ,within the period required by customer.
Remark: Also can supply IBR fittings and Specialized NACE & HIC Fittings.

 

Organization Profile

Proven in 1989, ZheJiang CZPT  Pipe-Fitting Group Co., Ltd. located in Xihu (West CZPT ) Dis. County ZheJiang Province CZPT , masking a land area of a hundred,000 sq. meters, with a workshop of twenty five,000 square meters and registered funds of 110 million RMB. Our organization has a strong staff team. There are over 360 staff, such as in excess of 30 experts and experts.

We are able of production CZPT pipe fittings. Our major products scope: steel elbow, tees, bends, reducers, caps, forged flanges and sockets. We have been in this line for more than 20 many years. Our goods are exported to a lot of nations and areas, this kind of as CZPT Asia, the Middle CZPT , CZPT pe and CZPT ica and so on. Our pipes and pipe fittings get pleasure from a great status in domestic and foreign markets. CZPT y 12 months, hundreds of foreign guests and countless domestic site visitors come to CZPT company for company cooperation.

We have initial-course inspection devices, perfect detecting means and effectively-qualified professionals. And we stick to ISO9000:2000 good quality method and efficiently handle procedure in generation. We have self-assurance that we can offer the ideal high quality items. We would like to consider obligation for any high quality uncertainty. Even so, CZPT cost is aggressive. Besides, we can provide the greatest service to you.

In purchase to steer clear of the policy of the anti-dumping duties imposed on pipe & fittings from the CZPT pe, CZPT States and other countries, We can re-export by way of other international locations like Malaysia, and many others, to circumvent the anti-dumping duties, which could make you to earn a lot more competitive cost.

Our merchandise are in compliance with several international specifications

Pipe Regular: ASTM A53,A106,API 5L,ASME B36.10M—1996.

Pipe-Fittings Regular: ANSI B16.9/sixteen.28,DIN 2605 / 2616,JIS P2311 / 2312,GOST.

Flange Standard: ANSI B16.5,DIN Collection,JIS Series,GOST Series.

Keyword: butt welded pipe fittings,ANSI B16.9 pipe fittings,seamless pipe fitting.

 

Certifications

 

 

Our Benefits

 

Manufacturing Interval
We have prosperous experience in arranging the creation and logistic, which could support us to cut the creation time period and ensure the supplying, so that we could meet up with CZPT ers’ urgent demand from customers. In addition to, CZPT well timed providing can also aid CZPT er to minimize the prepared stocks reserve.
 
Quality Control
Top quality handle starts from choosing the certified uncooked substance provider, then each great deal of raw aterial have to be re-analyzed at random when enter the material inventory.Then from the raw materials slicing method, shaping, warmth remedy, machining,floor therapy, packaging, all these procedure high quality handle is essential.

Quickresponse in pre-product sales and soon after-income
Precise and fast offer, specialist technique support, all can help the contractor or sourcing people to get the priority and possibility in recent intense competing market. And CZPT total and timely right after-revenue remedy offers the effective safety for CZPT er.
 

FAQ

 

Q: Can you supply Sort e, Certification of origin? 
A: Of course, we can provide. 
 
Q: Can you offer bill and CO with chamber of commerce? 
A: Indeed, we can supply. 
 
Q: Can you settle for L/C deferred 30, 60, 90days? 
A: We can. 
 
Q: Can you settle for O/A payment? 
A: We can. 
 
Q: Can you source samples? 
A: Indeed, some samples are totally free.
 
Q: Can you supply the items which comply with NACE? 
A: Of course, we can.
 
Q: Can you go to your factory
A: Sure, certain. Welcome.

EP gives a wide selection of inventory PTO shafts and yokes, clutches, shaft addresses, pipes and any other components to fulfill your PTO wants. Electricity consider-offs are utilized to transfer electrical power from a tractor or other electrical power supply to a resource. The two most generally used tractor electrical power consider-offs are 540 and a thousand rpm, and energy consider-offs can be of different sizes and lengths. If you have any questions about cardan shafts, cardan shaft elements, dimension drawings or extensions, remember to speak to our professionals on the internet.
china manufacturer  manufacturer  factory ASME B16.5 Slip on/So Cast Flange DN500 ASTM A105 A182 F304L Forging So Flange makers

Tags: